What Is An M6 Bolt In Inches?

What is the metric equivalent of 5 16?

Standard / Metric Wrench Conversion ChartBolt DiameterStandardMetric1/8″5/16″8mm3/16″3/8″10mm1/4″7/16″11mm5/16″1/2″13mm39 more rows.

Are m10 and 3/8 the same?

Since 10 mm is bigger than 3/8″, the simple answer is, “NO”. But you CAN drill the hole out to either 25/64″ (for 3/8-24) or letter “X” (. 397″)( for 3/8-16), and tap for a Helicoil.

What are standard bolt sizes?

Typically, machine bolt sizes range from 1/4″ to 1 1/4″ for square heads and 3/8″ to 1 3/4″ in diameter for hex heads, and lengths span from about 3/4″ to 18″ for square and 6 1/2″ to 24″ for hex heads. Measure length from under the head to the threaded end of the bolt.

How do you determine bolt size?

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.

What are the most common bolt sizes?

Table 3.MetricClosest InchM8-1.255/16-18 (Smaller)M10-1.53/8-16 (Smaller)M12-1.751/2-13 (Larger)M14-2.09/16-12 (Larger)16 more rows

How do you read bolt sizes?

How to Read Screw SizesRead the first letter of the size. This the largest diameter: the measurement of the screw on the thread. … Read the second number. This is either the number of threads per unit of the distance between threads; also known as the “thread pitch”. … Read the third number, generally the one following the “x.”

What size is a 14mm bolt?

Size ChartBolt sizeSizeTolerance5/16″UNF1/2″13.00M813mm13.301/4″BSW13.6414mm14.3537 more rows

Is m8 the same as 8mm?

All dimensions of the bolt (and nut) are a parameter of its basic diameter. The “M8” refers to an approximation of the major diameter of the thread of 8mm – actually slightly less, like 7.9, as the sharp edges are rounded off.

What size bolt is m8?

Tap sizeBasic major dia (mm)Basic major dia (inch)M6 x 16mm.2362M8 x 1.258mm.3150M8 x 18mm.3150M10 x 1.510mm.393724 more rows

What size hole is m10?

Metric ThreadsThreadDrill size for tapping standard metric threadsDrill size for tapping fine metric threadsM86.87M108.58.8M1210.210.8M141212.520 more rows

What size is a m6 bolt?

You can identify an M6 screw by measuring the diameter with a ruler. It’ll be 6 mm, or slightly more than 7/32 inches (0.228″).

What is the imperial equivalent of an m6 bolt?

Body Size MetricNearest Imperial Equivalent SizeM5-10-32M6-1/4-28M8-5/16-18M10-3/8-164 more rows

What is the metric equivalent to Grade 8?

Approximate Equivalency Chart Metric/US Roughly Equivalent US Bolt MaterialsMetric Nut ClassSAE J429Normally UsedGrades8.8859.895+10.910or 12812.910or 12.3 more rows

What are M bolt sizes?

The “M” designation for metric screws indicates the nominal outer diameter of the screw thread, in millimetres (e.g., an M6 screw has a nominal outer diameter of 6 millimetres).

What does m10 mean?

means a 10M10 means a 10 millimeter outer diameter for the bolt or whatever piece it is; M12 means 12 millimeters. The part after the ‘x’ is the pitch — how many mm a thread is wide. To figure out which you have, you can measure the existing part with calipers and a thread gauge.

How can you tell if a bolt is metric or standard?

Telling the difference between a metric and imperial bolt is easy. If the bolt has lines on the head its standard or imperial. If the bolt has numbers on the head then its metric. These markings indicate how strong the bolt is they call this tensile strength.

What is m20 bolt size?

Metric Hex Bolt DimensionsNOMINAL SIZE (D)BODY DIAMETERACROSS CORNERSm1212.0020.78m1414.0024.25m1616.0027.71m2020.0034.6413 more rows

What size is a m20 bolt in inches?

Coarse Thread BoltsNOM. DIA.PITCH mmDIAMETER inchM182.50.7087M202.50.7874M222.50.8661M2430.944927 more rows

What size is a 12mm bolt?

Metric Shoulder Bolt DimensionsShoulder Diameter (A)Thread (C)Head Diameter (E)8mm6mm x 1.013mm10mm8mm x 1.2516mm12mm10mm x 1.518mm16mm12mm x 1.7524mm3 more rows

Is m10 same as 10mm?

31496″) The M10, about 10 mm in diameter, (. 3937″) and the M12 about 12 mm in diameter, (. 4724″). The “M” designates the bolt is Metric and the number after the M indicates the size.